Name: Keithley 2182
Brand: Keithley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

I-2 Delta, Pulse Delta, and Differential Conductance

Overview

NOTE With the use of a bi-polar current source, the Model 2182 can perform basic Delta

measurements. See Section 5 of this manual for details on basic Delta measure-

ments.

This appendix summarizes the enhanced Delta, Pulse Delta, and Differential

Conductance measurement processes that can be performed with the use of the

Keithley Model 622x Current Source. It does NOT provide the procedures to con-

ﬁgure and perform these measurements.

Detailed information on all aspects of Delta, Pulse Delta, and Differential Con-

ductance operation are provided in the Model 622x Reference Manual (Section

5). An abbreviated version of this information is provided in the Model 622x

User’s Manual (Section 5).

You can use supplied example software that is available on the Keithley website

(www.tek.com/keithley) as a learning tool to conﬁgure and run Delta, Pulse

Delta, and Differential Conductance. With the use of any PC, simple mouse

clicks on a virtual front panel of the Model 622x are used to control operation.

For details, see “Using the example software” in Section 10 of the Model 622x

Reference Manual.

Keithley instrumentation requirements

Keithley instrumentation requirements for Delta, Pulse Delta, and Differential Conduc-

tance are as follows:

• Models 6220 and 2182 – Delta and Differential Conductance measurements.

• Models 6220 and 2182A – Delta and Differential Conductance measurements.

• Models 6221 and 2182 – Delta and Differential Conductance measurements.

• Models 6221 and 2182A – Delta, Pulse Delta, and Differential Conductance measure-

ments.

NOTE The ﬁrmware version of the Model 2182 must be A10 or higher.

The ﬁrmware version of the Model 2182A must be C01 or higher

Brand

Model

2182

Keithley 2182 User Manual

Other manuals for Keithley 2182