Keithley 2635 Reference Manual

2600S-901-01 Rev. C / January 2008 Return to Section Topics 1-3
Series 2600 System SourceMeter® Instruments Reference Manual Section 1: Getting Started
Organization of manual sections
The manual sections in the PDF version of this manual can be viewed by clicking the “Bookmarks”
tab on the left side of this window. This tab also provides direct links to the various sections and
section topics.
The manual sections are also listed in the Table of Contents located at the beginning of this
manual.
General information
Warranty information
Warranty information is located at the front of this manual. Should your Series 2600 require
warranty service, contact the Keithley Instruments representative or authorized repair facility in
your area for further information. When returning the instrument for repair, be sure to complete and
return the service form at the back of this manual to provide the repair facility with the relevant
information.
Contact information
If you have any questions, please contact your local Keithley Instruments representative or call
one of our Application Engineers at 1-888-KEITHLEY (1-888-534-8453), U.S. and Canada only.
You can also contact us through our website at www.keithley.com.
Safety symbols and terms
The following symbols and terms may be found on the instrument or used in this manual:
The
!
symbol on an instrument indicates that the user should refer to the operating instructions
located in the manual.
The symbol on the instrument shows that high voltage may be present on the terminal(s). Use
standard safety precautions to avoid personal contact with these voltages.
The symbol on an instrument shows that the surface may be hot. Avoid personal contact to
prevent burns.
The WARNING heading used in this manual explains dangers that might result in personal injury
or death. Always read the associated information very carefully before performing the indicated
procedure.
The CAUTION heading used in this manual explains hazards that could damage the instrument.
Such damage may invalidate the warranty.
Unpacking and inspection
Inspection for damage
The Series 2600 was carefully inspected electrically and mechanically before shipment. After
unpacking all items from the shipping carton, check for any obvious signs of physical damage that
may have occurred during transit (there may be a protective film over the display lens, which can
be removed). Report any damage to the shipping agent immediately. Save the original packing
carton for possible future shipment. Before removing the Series 2600 from the bag, observe the
following handling precautions.

Keithley 2635 Specifications

General

Brand	Keithley
Model	2635
Category	Measuring Instruments
Language	English