To Next Page

To Previous Page

This page left blank intentionally.

1-24 Return to Section Topics 2600S-901-01 Rev. C / January 2008

Section 1: Getting Started Series 2600 System SourceMeter® Instruments Reference Manual

Remote programming

Programming information is integrated with front panel operation throughout this manual. Basic

command information is listed in tables. For specific information on programming, refer to

Section 2, Section 12, and Section 13 of this manual.

Requesting readings

You can request readings by including the appropriate measurement command as the argument

for the print command. For example, the following will request a Channel A current reading:

print(smua.measure.i())

Requesting command settings

In a similar manner, settings for commands can be requested by including the command as the

argument for the print command. For example, the following command will request the voltage

source setting for Channel A:

print(smua.source.levelv)

Sense mode 2-wire

Source:

Function Voltage

Current value 0A

Voltage value 0V

Current range 100nA Models (2601/2602/2611/2612)

1nA Models (2635/2636)

Voltage range 100mV Models (2601/2602)

200mV Models /2611/2612/2635/2636)

Speed Normal (1 PLC)

Triggering:

Trigger-in source Immediate

Count Finite

Interval 0s

Delay 0s

TSP-Link node 1

Table 1-5 (continued)

Default settings

Keithley 2635 Reference Manual

Other manuals for Keithley 2635