Keithley 2635 Reference Manual

14-2 Return to Section Topics 2600S-901-01 Rev. C / January 2008
Section 14: Display Operations Series 2600 System SourceMeter® Instruments Reference Manual
Display functions and attributes
The display functions and attributes are used to perform the display operations covered in this
section.
Table 14-1 lists each display function/attribute (in alphabetical order) and cross references
it to the section topic where the function/attribute is explained.
Section 12 provides additional information
Table 14-1
Cross referencing functions/attributes to section topics
Function/Attribute Section Topic
display.clear
Clearing the display
display.getannunciators Annunciators
display.getcursor
Cursor position
display.gettext
Displaying text messages
display.input Capturing key-press codes
display.inputvalue
Parameter value prompting
display.loadmenu.add
display.loadmenu.delete
Load test menu
display.locallockout LOCAL lockout
display.menu Menu
display.prompt
Parameter value prompting
display.screen Display screen
display.sendkey Sending keycodes
display.setcursor
Cursor position
display.settext
Displaying text messages
display.smuX.digits Display resolution
display.smuX.measure.func Measurement functions
display.trigger.clear
display.trigger.wait
Display triggering
on the display functions and attributes.
Display features
Display screen
The Keithley Instruments Series 2600 System SourceMeter
®
can display source-measure values
and readings or user defined messages. The display screen options include the following:
• Source-measure, compliance screens:
• Display source and compliance values, and measure readings for SMU A.
• Display source and compliance values, and measure readings for SMU B (Models 2602/
2612/2636 only).
• Source-measure screen – Display source values and measure readings for SMU A and SMU
B (Models 2602/2612/2636 only).
• User screen – Display user-defined messages and prompts.
The display.screen attribute is used to select the display screen:
display.screen = displayId
where: displayId is set to one of the following values or names:
0 or display.SMUA
1 or display.SMUB

Keithley 2635 Specifications

General

Brand	Keithley
Model	2635
Category	Measuring Instruments
Language	English