Features of your vehicle
284
Windows
The automatic reverse feature for
the window is only active when the
"auto up" feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if
the window is raised using the half
way position on the power window
switch.
Always check for obstructions
before raising any window to avoid
injuries or vehicle damage. If an
object less than 4 mm (0.16 in) in
diameter is caught between the
window glass and the upper window
channel, the automatic reverse win
dow may not detect the resistance
and will not stop and reverse direc
tion.
The automatic reverse feature is
not activated while resetting power
window system.
Make sure body parts or other
objects are safely out of the way
before closing the windows to avoid
injuries or vehicle damage.
Power window lock button
The driver can disable the power
window switches on the rear pas
sengers' doors by pressing the
power window lock button to the
lock position (pressed).
When the power window lock button
is pressed:
䳜 The driver's master control can
operate all passengers' power
windows.
䳜 The front passenger's control can
operate the front passenger's
power window.
䳜 The rear passengers' control can
not operate the rear passenger's
power window.
䳜 To prevent possible damage to
the power window system, do not
open or close two windows or
more at the same time. This will
also ensure the longevity of the
fuse.
To Next Page
Loading...
Need help?
General
