Safety features of your vehicle
363
ISOFIX anchorage and top-tether anchorage
(ISOFIX anchorage system) for children
Securing a Child Restraint System
seat with "Top-tether Anchorage"
system (if equipped)
Child restraint system top tether
anchorages are located on the back
of the rear seatbacks.
To install the tether anchor:
1. Route the Child Restraint System
top-tether strap over the seat
back. Placing the top tether strap,
please follow the instructions of
the Child Restraint System manu
facturer.
2. Connect the top-tether strap to
the top-tether anchorage, then
tighten the top-tether strap
according to the instructions of
your Child Restraint System's
manufacturer to firmly attach the
Child Restraint System to the
seat.
Take the following precautions
when installing the top-tether:
䳜 Read and follow all installation
instructions provided with your
Child Restraint System.
䳜 NEVER attach more than one
Child Restraint System to a single
ISOFIX top-tether anchorage. This
could cause the anchorage or
attachment to come loose or
break.
䳜 Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached to
something else.
䳜 Child Restraint System anchor
ages are designed to withstand
only those loads imposed by cor
rectly fitted Child Restraint Sys
tem.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehicle.
To Next Page
Loading...
Need help?
General
