Features of your vehicle
924
Lighting
Like all assistance system, BVM
system has limitations. Sole-reli
ance on the system may result in a
collision.
䳜 ALWAYS look around your vehicle
to make sure there are no objects
or obstacles before moving the
vehicle in any direction to prevent
a collision.
䳜 Objects are closer than they
appear. Failure to visually confirm
that is safe to change the lane
before doing so may result in
crash and serious injury or death.
䳜 Always keep the camera lens
clean. The camera may not work
normally if the lens is covered
with foreign material.
Lighting
This vehicle is equipped with a vari
ety of lights to illuminate the inte
rior and exterior of the vehicle.
To prevent the battery from being
discharged, do not leave the head
light and interior light on for a pro
longed time while the engine is not
running.
Battery saver function
The purpose of this feature is to
prevent the battery from being dis
charged if the lights are left in the
ON position. The system automati
cally shuts off the position lamp 30
seconds after the vehicle is turned
off and the driver's door is opened
and closed.
With this feature, the position lamp
will turn off automatically if the
driver parks on the side of the road
at night and opens the driver's side
door.
If necessary, to keep the position
lamp on when the vehicle is turned
off, perform the following:
1. Open the driver-side door.
2. Turn the position lamp OFF and
ON again using the light switch on
the steering column.
To Next Page
Loading...
Need help?
General
