Maintenance
608
Fuses
3. Pull the suspected fuse straight
out. Use the removal tool pro
vided on the engine fuse panel
cover.
4. Check the removed fuse; replace it
if it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits
tightly in the clips.
If it fits loosely, we recommend that
you consult a professional work
shop. Kia recommends to visit an
authorized Kia dealer/service part
ner.
If you do not have a spare, use a
fuse of the same rating from a cir
cuit you may not need for operating
the vehicle, such as the power outlet
fuse.
If the head lamp, turn signal lamp,
stop signal lamp, fog lamp, DRL, tail
lamp, High Mounted Stop Lamp
(HMSL) do not work and the fuses
are OK, check the fuse panel in the
engine compartment. If a fuse is
blown, it must be replaced.
Replacing engine compartment
fuse
1. Turn the ignition switch and all
other switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the
cover up.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits
tightly in the clips. If it fits loosely,
we recommend that you consult a
professional workshop. Kia rec
ommends to visit an authorized
Kia dealer/service partner.
To Next Page
Loading...
Need help?
General
