83
8
8
Maintenance Light bulbs
Replacing map lamp (bulb type)
bulb
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric
shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
ings.
Replacing map lamp (LED type)
bulb
If the map lamp (LED) does not
operate, we recommend that the
system be checked by a profes
sional workshop. Kia recommends to
visit an authorized Kia dealer/ser
vice partner.
The LED lamps cannot be replaced
as a single component because they
are part of an integrated unit. The
LED lamps have to be replaced with
the unit.
A skilled technician should check or
repair the map lamp (LED), for it
may damage related parts of the
vehicle.
We recommend that the system be
checked by a professional workshop.
Kia recommends to visit an autho
rized Kia dealer/service partner.
To Next Page
Loading...
Need help?
General
