Infotainment system
245
Bluetooth
䳜 When you delete a paired device,
the Call history and Contacts
stored in the system are also
deleted.
䳜 To re-use a deleted device, you
must pair the device again.
Using a Bluetooth audio device
You can listen to music stored in the
connected Bluetooth audio device
via your vehicle's speakers.
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select Bluetooth audio and then
press the knob.
1. Information about the song
currently playing
1. Press the [MENU/CLOCK] button
on the control panel to access the
following a menu option.
2. Turn the [TUNE] knob to select
option and then press the knob.
䳜 Sound settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location
where sound will be concen
trated in the vehicle. Select
Fader or Balance, turn the
[TUNE] knob to select the
desired position, and then press
the knob. To set sound to be
centred in the vehicle, select
Centre.
- Equaliser: Adjust the output
level for each sound tone mode.
- Sound experience: Select the
location where sound is focused
in the vehicle between the
driver's seat and all other seats.
- Speed dependent vol.: Set the
volume to be adjusted auto
matically according to your
driving speed.
䳜 Depending on vehicle models or
specifications, available options
may vary.
䳜 Depending on the system or
amplifier specifications applied to
your vehicle, available options
may vary.
䳜 Mode popup: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
䳜 Bluetooth remote lock: Even if
Bluetooth remote control applica
tion is connected, if Set Lock
remote controls is enabled. Sys
To Next Page
Loading...
Need help?
General
