91
4
4
Features of your vehicle Blind-Spot View Monitor (BVM)
䳜 If the system is not operating
normally, the system should be
checked by a professional work
shop. Kia recommends to visit an
authorized Kia dealer/service
partner.
The system is a supplementary
driving assist system. Make sure to
check the vehicle's surroundings
yourself for safety. Do not solely
rely on what is displayed on the
screen. What you see on the screen
may differ from the actual vehicle's
location.
Always keep the camera lens clean.
The camera may not work normally
if the lens is covered with foreign
material.
Blind-Spot View Monitor (BVM)
(if equipped)
Blind-Spot View Monitor system
displays the driver's and passenger's
side rear view area including some
blind area which cannot be viewed
from RVM system.
To turn on BVM
When BVM is enabled in the set
tings.
1. ENGINE START/STOP button is in
the ON position.
2. The turn signal is activated.
To turn off BVM
1. ENGINE START/STOP button is in
the OFF position.
2. The turn signal is deactivated.
3. Other warning screen pops up and
takes priority over BVM.
To Next Page
Loading...
Need help?
General
