Features of your vehicle
964
Lighting
They will self-cancel after a turn
is completed. If the indicator con
tinues to flash after a turn, man
ually return the lever to the OFF
position.
To signal a lane change:
䳜 Move the turn signal lever slightly
and hold it in position (B).
The lever will return to the OFF
position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace
ment.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinking (3, 5,
or 7) by selecting "User Settings →
Lights → One Touch Turn signal".
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec
tion in the circuit.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlight is
turned on.
To turn off the fog lights:
䳜 Turn the fog light switch (1) to
the ON position.
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
To Next Page
Loading...
Need help?
General
