Safety features of your vehicle
383
ISOFIX anchorage and top-tether anchorage
(ISOFIX anchorage system) for children
Suitability of each seating position for belted & ISOFIX Child Restraint Sys
tems according to UN regulations (Information for vehicle users and CRS
manufacturers) (for vehicle equipped with ISOFIX)
䳜 Yes: Suitable for fitment of the designated category of CRS
䳜 No: Not suitable for fitment of the designated category of CRS
䳜 "-": Not applicable
䳜 The table is based on LHD vehicle. Except for the front passenger seat, the table is valid for RHD
vehicle. For RHD vehicle front passenger seat, please use information for the seating position num
ber 3.
F: Forward facing
R: Rearward facing
CRS categories
Seating positions
1, 2
3
4 5 6
POWE
R
MAN
UAL
Universal belted CRS -
Yes
*1
F, R
*1. Should be adjusted seat pumping properly, and CRS should not be installed for manual seat (not
equipped pumping function)
No
Yes
F, R
Yes
F
Yes
F, R
i-Size CRS
(with support leg)
ISOFIX
(F2,F2X,R1,R2)
- No No No No No
ISOFIX infant CRS
(i.e., CRS for a baby)
ISOFIX
(R1)
- No No
Yes
R
No
Yes
R
Carry cot
(ISOFIX lateral facing CRS)
ISOFIX
(L1,L2)
- No No No No No
ISOFIX toddler CRS - small
ISOFIX
(F2,F2X, R2)
- No No
Yes
F, R
No
Yes
F, R
ISOFIX toddler CRS - large*
(*: not booster seats)
ISOFIX
(F3, R3)
- No No
Yes
F, R
*2
*2. For fitment of ISOFIX toddler's rearward facing large CRS
䳜 Driver's seat: Seat pumping should be adjusted to appropriate height.
䳜 Front passenger seat: Seat sliding should be adjusted to appropriate position.
No
Yes
F, R
*2
Booster seat-Reduced width ISO/B2 - No No Yes No Yes
Booster seat-Full width ISO/B3 - No No Yes No Yes
To Next Page
Loading...
Need help?
General
