Driving your vehicle
606
Cruise control system
The driving mode will be set to Driv
ing control when the restarted, If it
is in Traction Control.
Traction mode is a device applied for
2WD(2 wheel drive) vehicles. Please
do not drive too hard on rough roads
where 4WD(4 wheel drive) vehicles
performance are required.
Invalid mode selection can lead to
loss of traction and skidding, partic
ularly on slippery roads, this can
cause you to lose control of the
vehicle, which can lead to accidents
and serious injuries.
Traction mode operation
Traction mode offers special trac
tion tuning for snow/wet/mud/sand,
optimizing available traction in
adverse conditions. Traction mode
adjusts left and right wheel slip con
trol, engine torque and shift pat
terns according to available traction
levels.
Cruise control system
(if equipped)
The cruise control system allows
you to program the vehicle to main
tain a constant speed without
pressing the accelerator pedal.
This system is designed to function
above approximately 30 km/h.
䳜 If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated)
the cruise control can be switched
on accidentally. Keep the cruise
control system off (CRUISE indi
cator light OFF) when the cruise
control is not in use, to avoid
inadvertently setting a speed.
䳜 Use the cruise control system
only when traveling on open high
ways in good weather.
䳜 Do not use the cruise control
when it may not be safe to keep
the car at a constant speed, for
instance, driving in heavy or vary
ing traffic, or on slippery (rainy,
icy or snow/wet-covered) or
winding roads or over 6% uphill
or down-hill roads.
䳜 Pay particular attention to the
driving conditions whenever using
the cruise control system.