Driving your vehicle
626
Cruise control system
2. Accelerate to the desired speed,
which must be more than 30 km/h.
Manual transmission
For manual transmission vehicles,
you should depress the brake pedal
at least once to set the cruise con
trol after starting the engine.
3. Move the lever down (to SET-),
and release it at the desired
speed. The cruise status on the
LCD screen will appear. Release
the accelerator pedal at the same
time. The desired speed will auto
matically be maintained.
On a steep grade, the vehicle may
slow down or speed up slightly
while going downhill.
Increasing cruise control set speed
Follow either of these procedures:
䳜 Move the lever up (to RES+) and
hold it. Your vehicle set speed will
increase by 10 km/h. Release the
lever at the speed you want.
䳜 Move the lever up (to RES+) and
release it immediately. The cruis
ing speed will increase by 1.0 km/
h each time you move the lever up
(to RES+) in this manner.
To Next Page
Loading...
Need help?
General
