DAILY CHECK
For your own safety and maximum
service life of the machine, make a
thorough daily inspection before start-
ing the engine.
WALK AROUND INSPECTION
Look around and under the tractor for
such items as loose bolts, trash build-
up, oil or coolant leaks, or broken or
worn parts.
1.Parkthemachineonaatsurface.
2. Check the engine oil before starting
the engine or wait 5 minutes or more
after the engine has stopped.
3. To check the oil level, draw out the
dipstick, wipe it clean, replace it, and
draw it out again.
Check to see that the oil level is
between the two notches. If the level
is too low, add new oil to the pre
-
scribed level at the oil inlet. (Refer to
"Lubricants" in the Maintenance)
CHECKING ENGINE OIL LEVEL
(1) Oil Inlet (2) Oil Gauge
(A) Oil level is acceptable within this range
t91Oa04a
To avoid personal injury:
Be sure to check and service
the tractor on a at place with
the engine stopped and the
parking brake "ON".
•
CAUTION
When using oil of a different
brand or viscosity from the
previous one, remove all of the
old oil. Never mix two different
types of oil.
Do not start the engine if the
amount of oil is insufcient.
•
•
IMPORTANT
To avoid personal injury:
Be sure to stop the engine be-
fore checking the oil level.
•
CAUTION