Kioti LX500L User Manual

10
-
10
LX500L
6. After the new filter has been in-
stalled,ll withoil up tothe upper
line of the gauge, not to where it
willoverowwhenthepressureis
increased after the bleeder plug is
opened.
7. After running the engine for a few
minutes, stop it and check the oil
level again, and adding oil to the
prescribed level.
8.Makesurethatthetransmissionuid
does not leak through the seal.
To prevent serious damage to
the hydraulic system, use only
a KIOTI genuine lter.
•
IMPORTANT
(1) Drain Plug
CHANGING TRANSMISSION FLUID
t91Oa16a
Do not operate the tractor im-
mediately after changing the
transmission fluid. Run the
engine at medium speed for a
few minutes to prevent damage
to the transmission.
•
IMPORTANT
S76Oa17a
(1) Gauge (2) Oil Filler Plug
(A) Oil level is acceptable within this range
1. To drain the used oil, remove the
drain plug at the bottom of the
transmission case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain
plug.
3. Fill with new KIOTI TF65uidupto
the upper line of the gauge.
(See "Lubricants" in Maintenance
Section)
LX500_en_om_10.indd 10 2012-11-27 오후 2:57:08

Kioti LX500L Specifications

General

Brand	Kioti
Model	LX500L
Category	Tractor
Language	English