INSTRUCTIONS FOR USE OF POW-
ER STEERING
1. Power steering is only possible while
the engine is running. If the engine
speed is decreased, the steering
wheel may be somewhat hard to
turn
When the engine is stopped, the
steering wheel will still work with the
heavy feeling.
2. If the steering wheel is turned to the
end, the safety valve is activated.
Avoid keeping the steering wheel
turned to the end for a long time.
3. Avoid turning the steering wheel
while the tractor is stopped. This
may cause premature wear of the
tires.
4. Steering wheel operation is very
easily performed with power steer-
ing, so be careful when driving on
the road at high speed. So you
do not turn more sharply than you
meant.
1. When you load the tractor on the
truck, do it by driving backward.
2. If the engine stalls out halfway, de-
press the brake pedal immediately,
and then release the pedal slowly to
return to the ground. After that, start
the engine again to go up.
LOADING INTO AND UNLOADING
OUT OF THE TRUCK
(1) PTO Selector Switch (Auto / Manual)
(2) PTO Shift Lever
OPERATING PTO
OPERATING REAR PTO
S76o543a
1. Three speeds can be selected by
PTO.
2. It is necessary to apply the clutch
to shift the PTO. Depress the clutch
pedal fully so that the tractor and
the PTO driving implement can be
stopped completely before you de-
press the PTO switch.
To Next Page
Loading...
Need help?
General
