Kioti LX500L User Manual

5
-
3
OPERATION
5
CHANGING LUBRICATING OIL
FOR NEW TRACTOR
Special attention should be given to
lubricating oil for new tractors. New
parts are not accustomed to each
other and are not broken in properly.
Small metal grit can develop in the
lubricating system as metal parts begin
to break-in, and continuous use of the
contaminated oil can cause damage
and failure to the tractor.
Therefore you should change the
tractor’s oil after the break-in period.
For further details on the oil change
and service intervals, refer to "Main-
ternance" Section.
OPERATING NEW TRACTOR
In handling a new tractor, the following
precautions should be observed.
 You should not operate your tractor
atfullspeedfortherstftyhours
of use.
 Avoid sudden starts and stops.
 In cold weather, allow your tractor
plenty of time to warm up.
 Do not run the engine at speeds
faster than necessary.
 Take due caution when operating
your tractor on rough roads or ter-
rain.
The above precautions are not limited
to new tractors only but are a good
practice for tractors regardless of
their age.
How a new tractor is handled and
maintained determines the life of the
tractor.
New tractors, though they are subject
to various tests before delivery from the
factory, may need to be accustomed to
various related parts. Care should be
takentooperatethetractorfortherst
50 hours at a slower speed and avoid
excessive work or operation until the
various parts become ‘break-in’.
The manner in which the tractor is
handled during the ‘breaking-in’ period
greatly affects the life of your tractor.
Therefore, to obtain the maximum
performance and the longest life of the
tractor, it is very important to properly
break-in your tractor.
LX500_en_om_05.indd 3 2012-11-27 오후 3:07:15

Kioti LX500L Specifications

General

Brand	Kioti
Model	LX500L
Category	Tractor
Language	English