.
OPERATION
OPERATION
OPERATION
OPERATION
2. Depress brake pedal (2) and stop the machine.
3.
Set gear shift lever (3) to the P (PARKING) position while
pressing its knob. The parking brake lamp lights up at the same
time.
4.
Operate the work equipment control lever, and lower the blade
and the ripper (or the scarifier) to the ground.
CHECKS AFTER COMPLETION OF OPERATION
Check the engine coolant temperature, engine oil pressure, and
fuel level on the main panel.
In case the engine overheated, do not stop the engine suddenly,
but run it at medium speeds to cool down before stopping it.
If the cooling fan does not rotate at the time of overheat, stop the
engine immediately.
3 - 166
To Next Page
Loading...
Need help?
General
