.
SAFETY
PRECAUTIONS FOR MAINTENANCE
SAFETY
PRECAUTIONS FOR MAINTENANCE
To prevent the machine from articulating, set the articulation
lock pin (2) to the LOCK position (L).
TWO WORKERS FOR INSPECTION AND MAINTENANCE WHEN ENGINE IS RUNNING
To prevent personal injury, do not carry out maintenance with the engine running. If maintenance must be carried
out with the engine running, carry out the operation with at least 2 workers and do as follows.
1 worker must always sit in the operator's seat and be ready to
stop the engine at any time. All workers must maintain contact
with the other workers.
When carrying out operations near the fan, fan belt, or other
rotating parts, there is a hazard of being caught in the parts, so
be careful not to come close.
Never drop or insert tools or other objects into the fan, fan belt,
or other rotating parts. There is danger that they may contact
the rotating parts and break or be sent flying.
Place speed lever (1) at the P (parking) position to prevent the
machine from moving.
Be careful not to touch the control levers or steering equipment.
If the control levers must be operated, always give a signal to
your partner and have your partner withdraw to a safe place.
INSTALLING, REMOVING, OR STORING ATTACHMENTS
Appoint a leader before starting removal or installation
operations for attachments.
Place attachments that have been removed from the machine in
a stable condition so that they do not fall. And take steps to
prevent unauthorized persons from entering the storage area.
2 - 34
To Next Page
Loading...
Need help?
General
