.
MAINTENANCE
SERVICE PROCEDURE
CHANGE OIL IN TANDEM DRIVE CASE
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause burns. Wait for the temperature
to go down before starting the work.
Refill amount of oil: 57 liters (15.06 US gal) each of right and left
1. Put an oil container under drain plug (P) to catch the oil.
2.
Remove drain plug (P) and drain the oil.
3.
After draining the oil, clean drain plug (P) and install it again.
4. Pour in the specified amount of engine oil from oil filler (F).
5.
After refilling the oil, check that the oil is at the specified level.
For details, see "CHECK OIL LEVEL IN TANDEM DRIVE
CASE, ADD OIL (PAGE 4-52)".
4 - 74
To Next Page
Loading...
Need help?
General
