.
OPERATION
TROUBLESHOOTING
TROUBLESHOOTING
AFTER RUNNING OUT OF FUEL
WARNING
When starting the engine again, check carefully that the area around the engine is safe before cranking the engine.
When starting the engine again after running out of fuel, fill with fuel, then bleed the air from the fuel system before
starting the engine.
PROCEDURE FOR BLEEDING AIR
1. Fill the fuel tank with fuel.
2.
Open up the engine side cover on the left side of the machine.
3.
Loosen and pull out feed pump knob (2) and move it forward
and backward.
The plug on the side surface of the fuel prefilter head does
not need to be removed.
Keep moving knob (1) until it becomes heavy.
4.
After bleeding air, push in and tighten knob (1).
WHEN LEANING PIPING IS DAMAGED
WARNING
If the machine is driven with the leaning cylinder piston rod fluctuating or the front wheels leaning on one side because of
damaged leaning piping, dangerously unstable steering and excessively worn tires will result. Repair the faulty leaning pipe
quickly.
If the leaning piping is broken, call your Komatsu distributor for repair.
METHOD OF USING LEANING STOPPER
Fix the front axle and hole (1) in the leaning rod with the bolt in the
tool box.
3 - 177
To Next Page
Loading...
Need help?
General
