.
OPERATION
TROUBLESHOOTING
OPERATION
TROUBLESHOOTING
During operations of the restart mode, a flashing display appears
on the shift indicator display of the machine monitor.
LOWERING WORK EQUIPMENT WHEN ENGINE IS STOPPED (RELEASE WORK
EQUIPMENT OIL PRESSURE)
WARNING
Check that the surrounding area is safe, then lower the work equipment.
Remove the cover using a step.
WHEN LOWERING THE BLADE
1. Slowly loosen the pressure releasing plug (1) in the control
valve.
Width across flats of plug: 10 mm (0.4 in)
2.
Lower the blade to the ground.
3.
Tighten the pressure releasing plug (1).
Tightening torque: 19.6 to 24.5 Nm (2.0 to 2.5 kgm, 14.5 to
18.1 lbft)
3 - 184
To Next Page
Loading...
Need help?
General
