.
MAINTENANCE
SERVICE PROCEDURE
SERVICE PROCEDURE
INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
Carry out the following maintenance only after the first 250 hours of operation on new machines.
CHANGE OIL IN TRANSMISSION CASE, CLEAN STRAINER
CHANGE OIL IN FINAL DRIVE CASE
CLEAN FINAL DRIVE BREATHER
CHANGE OIL IN CIRCLE REVERSE GEAR CASE
REPLACE HYDRAULIC TANK FILTER ELEMENT
CHANGE OIL IN TANDEM DRIVE CASE
For details of the method of replacing or maintaining, see the section on EVERY 250 HOURS, EVERY 500 HOURS,
1000 HOURS AND 2000 HOURS SERVICE.
INITIAL 1000 HOURS SERVICE (ONLY AFTER THE FIRST 1000 HOURS)
Carry out the following maintenance only after the first 1000 hours of operation on new machines.
CHECK ENGINE VALVE CLEARANCE, ADJUST
For details of the method of replacing or maintaining, see the section on EVERY 2000 HOURS SERVICE.
4 - 18
To Next Page
Loading...
Need help?
General
