3
Specifying Settings From the Control Panel
3-8 bizhub 750/600
Specifying Settings From the Control Panel Chapter 3
2
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
To display the Administrator Setting screen
1 Press the [Utility/Counter] key.
2 Touch [3 Administrator Setting].
– In Utility mode, an item can also be selected by pressing the key in
the keypad for the number beside the desired button. For “3 Admin-
istrator Setting”, press the [3] key in the keypad.
To Next Page
Loading...
Need help?
General
