Specifying Settings From the Control Panel
3
bizhub 750/600 3-143
Specifying Settings From the Control Panel Chapter 3
Using Novell NDS
Before specifying the settings, prepare the information described below. The
settings can be specified with Novell NDS Netware Server 4.0 or later.
Administrator password (required)
Default NDS tree name (required)
Default NDS context name (required)
List of the users for authentication (required)
!
Detail
Do not use “ ” ” and “+” in the external server password. For details on
the operating conditions of an external server, ask the network adminis-
trator.
If “Password Rules” is enabled, a password with less than 8 characters
cannot be registered. For details on the password rules, refer to User’s
Guide [Copy Operations].
To specify the settings for using Novell NDS
1 Display the Administrator Setting screen.
2 In [Administrator Setting] — [User Authentication/Account Track] —
[Authentication Method], specify the following settings.
– Specify “On (External Server)” in User Authentication.
To Next Page
Loading...
Need help?
General
