Scanning Documents
2
bizhub 750/600 2-15
Scanning Documents Chapter 2
To search the destination
1 Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-43.
2 After specifying the settings, touch [OK].
3 Load the document into the ADF or position it on the original glass of
the machine.
4 Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
To Next Page
Loading...
Need help?
General
