Konica Minolta BIZHUB 600 User Manual

3
Specifying Settings From the Control Panel
3-106 bizhub 750/600
Specifying Settings From the Control Panel Chapter 3
3.26 Total Counter Report Setting
You can specify the total counter notification schedule and notification des-
tination.
The settings that can be specified in the total counter screen are described
below.
To specify the total counter report settings
1 In the Administrator Setting screen, touch [5 Network Setting].
2 In the Network Setting screen, touch [0 Detail Setting].
3 In the Detail Setting screen, touch [4 Total Counter Report Setting].
The Total Counter Report Setting screen appears.
4 Specify the desired settings.
5 Touch [Close].
Item Description
Set Schedule Specify the period for notifying the total counter. Two types
of notification schedules can be specified. For details on
specifying the setting, refer to “Schedule Setting” on
page 3-107.
Set notification addresses Specify the e-mail address of the notification destination.
The schedule can also be specified per address. For details
on specifying the setting, refer to “Notification Address Set-
ting” on page 3-109.
Device Nickname Specify the model name that is included in the notification
e-mail. Use the keyboard that appears in the touch panel to
type in the model name (up to 20 characters).
[Send Now] button Touch to send the current total counter to the notification
destination.

Konica Minolta BIZHUB 600 Specifications

General

Brand	Konica Minolta
Model	BIZHUB 600
Category	All in One Printer
Language	English