3
Specifying Settings From the Control Panel
3-96 bizhub 750/600
Specifying Settings From the Control Panel Chapter 3
To specify E-Mail RX (POP) settings
1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2 In the Network Setting screen, touch [9 E-Mail Setting].
3 In the E-Mail Setting screen, touch [2 E-Mail RX (POP)].
The E-Mail RX (POP) screen appears.
4 Specify the desired settings.
5 In the E-Mail RX (POP) screen, touch [Detail Setting].
The POP Detail screen appears.
6 Specify the desired settings.
7 Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The POP details are set, and the E-Mail RX (POP) screen appears
again.
8 Touch [Fwd.→].
E-Mail RX (POP) screen 2/2 appears.
To Next Page
Loading...
Need help?
General
