3
Specifying Settings From the Control Panel
3-62 bizhub 750/600
Specifying Settings From the Control Panel Chapter 3
Support Operation
Specify whether each function is supported in IPP communication.
[OFF]: Responds as not supported.
[ON]: Responds to communication. No response is returned for “Cancel
Job”, “Open Job”, and “Open Job Attributes”.
1 On the IPP Setting screen, touch [Support Operation].
The Support Operation screen appears.
2 Touch [ON] or [OFF] for each item.
3 Touch [OK].
The operation support information is set.
2
Note
To cancel changes to the setting, touch [Cancel].
To Next Page
Loading...
Need help?
General
