Specifying Settings From the Control Panel
3
bizhub 750/600 3-61
Specifying Settings From the Control Panel Chapter 3
7 Specify each item.
8 Touch [Fwd.→].
http Server Setting screen 4/4 appears.
9 Specify the desired settings.
10 Touch [OK].
The IPP settings are applied.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
To Next Page
Loading...
Need help?
General
