3
Specifying Settings From the Control Panel
3-12 bizhub 750/600
Specifying Settings From the Control Panel Chapter 3
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
!
Detail
For the procedure to enter characters, refer to “Entering text” on
page 6-5.
FTP Destinations
FTP destinations can be registered.
1 In the Scan screen, touch [1 Address Book]. (Refer to page 3-5 for
more details.)
2 Touch [2 FTP].
The FTP screen appears.
To Next Page
Loading...
Need help?
General
