4
Specifying Settings Using PageScope Web Connection
4-44 bizhub 750/600
Specifying Settings Using PageScope Web Connection Chapter 4
4.13 Time Adjustment Setting
Select whether the date and time of the machine can be adjusted through ac-
quisition from the NTP server.
To adjust the time
1 On the System tab, click [Date/Time].
2 Click [Time Adjustment Setting].
3 Specify settings for the following.
4 Click the [Apply] button.
– To immediately apply the adjustment, click the [Adjust] button.
Time Adjustment Setting Select whether or not the time is automatically adjusted
through NTP.
NTP Server Address Enter the NTP server address (up to 255 characters in the for-
mat “***.***.***.***” or FQDN). Only symbols “-” and “.” can be
used.
Port No. Type in the NTP server port number. (Range: 1 to 65535)
To Next Page
Loading...
Need help?
General
