Selecting the Color Correction Factor (C.C.F.)
[Meas. Cond.] -
[CCF]
If you know the color correction factor for the light source to be measured in advance, you
can input the value into the instrument to display a corrected measured value.
* Factory setting: OFF
Operating Procedure
1
7 3, 5, 6
2, 6
3, 4, 6
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [Meas. Cond.] screen.
3. Press the
UP
key or
DOWN
key to
select [CCF] and then press the
ENTER
key.
LS-specic menu (Not shown for CS)
40
Settings
C.C.F.
To Next Page
Loading...
Need help?
General
