Konica Minolta CHROMA METER User Manual

[User Calibr.] - [Select from Stored Data]
2. By Selecting Stored Data
Operating Procedure
1
96 3, 5, 6, 7, 8
2, 4, 6, 7
3, 4, 6, 7
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [User Calibr.] screen.
3. Press the
UP
key or
DOWN
key to
select [Select from Stored Data] and
then press the
ENTER
key.
4. The screen for selecting the calibration
channel is displayed. Press the
UP
key or
DOWN
key to select the
channel of the calibration standard to
register.
You can check the details of the current data by
pressing the
RIGHT
key or
LEFT
key.
68
Measurement
Preparation
USER CAL

Konica Minolta CHROMA METER Specifications

General

Brand	Konica Minolta
Model	CHROMA METER
Category	Measuring Instruments
Language	English