Calibration
Calibration Channels
This instrument has calibration channels numbered from CH00 to CH10 (11 channels in
total).
CH00 is a channel for performing measurement in accordance with the Konica Minolta
calibration standard. It is preset with correction coefcients for Konica Minolta calibration
which cannot be changed by the user.
Users can set the following item to each of CH01 through CH10.
1. User calibration correction coefcient
The user calibration correction coefcients are used in common in one calibration channel
for each measurement mode of L
v x y, Lv uʼvʼ, Lv Tcp duv, X Y Z, and dominant wavelength.
64
Measurement
Preparation
CAL
To Next Page
Loading...
Need help?
General
