Konica Minolta CHROMA METER User Manual

2. By Selecting Stored Data
Operating Procedure
1
86 3, 5, 6, 7
2, 4, 6
3, 4, 6
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [Target] screen.
3. Press the
UP
key or
DOWN
key to
select [Select from Stored Data] and
then press the
ENTER
key.
4. The screen for selecting the target to
be registered is displayed. Press the
UP
key or
DOWN
key to select the
target.
[Target] - [Select from Stored Data]
74
Measurement
Preparation
TARGET

Konica Minolta CHROMA METER Specifications

General

Brand	Konica Minolta
Model	CHROMA METER
Category	Measuring Instruments
Language	English