Chapter 5 Disassembly and Assembly
5-4
îš„ Power ON
Connect the Ethernet cable and power cable and turn ON the power.
1 Connect the Ethernet cable to the equipment.
2 Connect the power cable to the equipment and
power outlet.
3 Turn on the power supply circuit breaker.
4 Press the "operation" switch.
Equipment will start up and initialization will be
performed. When the initialization is completed,
"READY" will be shown on the message display
window.
Now, you have finished with the procedures to turn the power on.
Second Front Back Side
operation erase
"operation" Switch
To Next Page
Loading...
Need help?
General
