ii
How to Use This Manual
Configuration of This Manual
Caution about the safety and operation of this equipment are described in following 8 chapters in this
manual.
Chapter 1: Warning and Caution Regarding Safety
This chapter describes the caution regarding the safety before performing the repair/maintenance.
Chapter 2: Before Repair
This chapter describes the basic knowledge about the equipment before performing the repair/
maintenance.
Chapter 3: Troubleshooting
This chapter describes how to handle when there is a trouble on the equipment.
Chapter 4: Confirm Operation Using the Service Tool
This chapter describes how to confirm the operation of the REGIUS MODEL 110.
Chapter 5: Disassemble and Assemble
This chapter describes how to disassemble and assemble the equipment.
Chapter 6: Adjustment
This chapter describes how to adjust each units, which is necessary in repair/maintenance.
Chapter 7: Periodic Maintenance
This chapter describes how to perform periodical maintenance of the equipment.
Chapter 8: Appendix
This chapter contains technical information that can be referenced during repair/maintenance.
Im
ortant
Service tool on the REGIUS console will be used for setting and operation confirmation of the
equipment. Please see the install/service manual of the REGIUS console for the operation of
service tool.
The reference point (title) to the REGIUS consol install/service manual listed in this manual is
as of May 21, 2007.
To Next Page
Loading...
Need help?
General
