Konica Minolta REGIUS 110 Service Manual

Chapter 3 Troubleshooting
3-25
3.2.14 06650 ~ 06683: FPGA Errors
• Error codes S column: Errors at the read operation/calibration.
• Error codes E column: Errors during erase operation.
• Error codes I column: Errors during initialization.
References for response method
•
•
•
•
•
Error code Description of the error Response
(References to replacement methods are
listed at the end of the table.)
S E I
06650 FPGA error (failure on event
driver access)
Failed on event driver access
during the initialization after the
PowerON.
06651 FPGA error (failure on access
to MDU)
Failed to access the MDU
during the initialization after the
PowerON.
06652 FPGA error (failure on access
to LMC)
Failed to access the LMC during
the initialization after the
PowerON.
06653 06668 06683 FPGA error (failed on I/O
control)
Failed on IOCTL (I/O control)
during access to the FPGA.
06654 - - FPGA error (failed to open
image driver)
Failed to open the image driver
when transferring the image.

Konica Minolta REGIUS 110 Specifications

General

Brand	Konica Minolta
Model	REGIUS 110
Category	Measuring Instruments
Language	English