Konica Minolta REGIUS 110 Service Manual

Chapter 8 Appendix
8-7
 Setup Procedure for Reader Parameter
1 Change the values for the items that needs to be changed.
Following items are reader parameter.
• [LCD] - [Language]
• [Speaker] - [Volume]
2 Confirm the operation of the changed items.
•
Click the [Test Screen] button if you have changed the display language of the LCD.
• Click the [Start] button if you have changed the volume of the speaker.
3 Click the [Send] button.
Value will be registered.
8.1.7 [Adjustment] Panel
Adjustment of the justifier mechanism and the transporter mechanism can be performed in the
[Adjustment] panel.
Im
p
ortant
The value of the last confirmation performed will be set as a parameter. Always perform the
confirmation when changing the setting.
No. Item/button Description
1 Cassette
Selection
Cassette Type Specify the cassette size to be the standard when the
justifier guide and the push plate is to be operated.
2 Adjustment of
Justifier Motor
Amount of
Justification
Setup the compensation value for the cassette fixing position
(distance the justifier guide moves to fix the cassette).
[Initialization] Move other mechanism away before starting the
operation of the justifier mechanism.
[Move To HP] Move the justifier guide to the home position.
[Position of Justification] Move the justifier guide to the cassette fixing position.
3 Adjustment of
Pressing
Amount
[Pressing Amount] Setup the compensation value for the press down
position (distance the push plate unit moves to absorb
the back plate of the cassette).
[Initialization] Move other mechanism away before starting the
operation of the transporter unit.
[Move To HP] Move the push plate unit to the home position.
[Pressing Position] Move the push plate unit to the press down position
(position to absorb the cassette back plate).
1
2
3
4

Konica Minolta REGIUS 110 Specifications

General

Brand	Konica Minolta
Model	REGIUS 110
Category	Measuring Instruments
Language	English