Konica Minolta REGIUS 110 Service Manual

Chapter 8 Appendix
8-4
8.1.3 [Pulse Motor] Panel
Confirmation of the operation of the receiver and the transporter can be performed in the [Pulse Motor]
panel.
No. Item/button Description
1 Cassette Type Specify the cassette size to be the standard when the
receiver, the justifier guide, and the push plate is to be
operated.
2 Receiver Motor [Initialization] Move other mechanism away before starting the
operation of the receiver.
[Move To HP] Move the receiver to the home position.
[Position 1] Move the receiver to the position 1.
[Position 2] Move the receiver to the position 2.
[Transportation
Position]
Move the receiver to the transportation position (height
when transporting the cassette).
3 Justifier Motor [Initialization] Move other mechanism away before starting the
operation of the justifier guide.
See the "Important: Initialization of the Justifier Motor"
regarding the operation.
[Move To HP] Move the justifier guide to the home position.
[Cassette Fixed
Position]
Move the justifier guide to the cassette fixing position.
[Cassette Support
Position]
Slightly release the justifier guide from the cassette
fixation position.
4 Transporter
Motor
[Initialization] Move other mechanism away before starting the
operation of the transporter unit.
[Move To HP] Move the push plate unit to the home position.
[Pressing Position] Move the push plate unit to the pressing position
(position to absorb the cassette back plate).
[Reading Position] Move the push plate to the reading position (position to
read/erase the image).
Im
p
ortant
Initialization of the Justifier Motor
It will stop with message, "Uploading..." when the [Initialization] button for justifier motor is
clicked. Block the light of the insertion slot detection sensor 1 using your hands.
2
1
3
4

Konica Minolta REGIUS 110 Specifications

General

Brand	Konica Minolta
Model	REGIUS 110
Category	Measuring Instruments
Language	English