KTM 500 EXC F 2024 User Manual

ELECTRICAL SYSTEM 15
115
15.6 Installing the headlight mask with the headlight
W00350-11
Main work
–
Join plug-in connectors
1
.
W00349-11
– Position the brake line in the brake line guide.
– Position the headlight mask.
The holding lugs engage in the fender.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Check the headlight setting. ( p. 116)
15.7 Changing the headlight bulb
Preparatory work
– Remove the headlight mask with the headlight. ( p. 114)
I00431-10
Main work
–
Turn LED unit
1
counterclockwise all the way and take it out
of the reflector.
Guideline
Only touch the LED unit on the cooling element.
I00432-10
– Insert the LED unit into the reflector and turn it clockwise all
the way.
Headlight (LED)
Info
Ensure that O-ring
2
is seated properly.
Finishing work
– Install the headlight mask with the headlight. ( p. 115)
– Check the headlight setting. ( p. 116)

KTM 500 EXC F 2024 Specifications

General

Displacement	510.9 cm³
Bore x Stroke	95 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Ground Clearance	355 mm
Seat Height	960 mm
Dry Weight	106.5 kg
ABS	No
Engine Type	Single Cylinder, 4-Stroke Engine
Fuel System	Electronic fuel injection (EFI)
Front Brake	Disc brake 260 mm
Rear Brake	Disc brake 220 mm
Fuel Tank Capacity	8.5 liters
Frame	Central double-cradle type 25CrMo4 steel