KTM 500 EXC F 2024 User Manual

7 COMBINATION INSTRUMENT
30
Info
Repeatedly press the button briefly until the desired
function is reached.
If no button is pressed for 20 seconds, the settings are
automatically saved.
Briefly press
the button .
Activates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Deactivates the flashing display and changes to
the next display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display without changes
Wait 10 - 12
seconds.
Setup menu starts, stores the settings, and
changes to H or ODO.
7.10 Adjusting the unit of measurement
400329-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
–
Press the button for 2–3 seconds.
– Repeatedly press the button briefly until Km/h/Mph flashes.
In measurement unit mode, you can change the unit of measure-
ment.
Info
If no button is pressed for 5 seconds, the settings are auto-
matically saved.
Briefly press
the button .
Starts selection, activates Km/h display
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
Activates Mph display
Press the but-
ton for 2–3
seconds.
No function
Wait 3 - 5
seconds.
Changes to the next display, changes from
selection to the Setup menu
Wait 10 - 12
seconds.
Stores and closes the Setup menu

KTM 500 EXC F 2024 Specifications

General

Displacement	510.9 cm³
Bore x Stroke	95 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Ground Clearance	355 mm
Seat Height	960 mm
Dry Weight	106.5 kg
ABS	No
Engine Type	Single Cylinder, 4-Stroke Engine
Fuel System	Electronic fuel injection (EFI)
Front Brake	Disc brake 260 mm
Rear Brake	Disc brake 220 mm
Fuel Tank Capacity	8.5 liters
Frame	Central double-cradle type 25CrMo4 steel