COMBINATION INSTRUMENT 7
29
7.7 Display mode SPEED (speed)
400317-02
– Repeatedly press the button briefly until SPEED appears on
the left side of the display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Make the setting according to the country.
When an impulse comes from the front wheel, the left side
of the display changes to the SPEED mode and the current
speed is shown.
7.8 Display mode SPEED/H (operating hours)
400316-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
In display mode H, the operating hours of the engine are
displayed.
The operating hour counter stores the total traveling time.
Info
The operating hour counter is necessary for ensuring that
service work is carried out at the right intervals.
If the combination instrument is in H display mode when
starting off, it automatically changes to the ODO display
mode.
The H display mode is suppressed during the journey.
Press the but-
ton for 2–3
seconds.
The display changes to the functions setup
menu.
Briefly press
the button .
Next display mode
Press the but-
ton for 2–3
seconds.
No function
Briefly press
the button .
No function
7.9 Setup menu
400344-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
– Press the button for 2–3 seconds.
The Setup menu displays the active functions.
To Next Page
Loading...
Need help?
General
