KTM 500 EXC F 2024 User Manual

7 COMBINATION INSTRUMENT
28
400330-01
– Repeatedly press the button briefly until CLK appears at the
bottom right of the display.
– Press the button for 2–3 seconds.
The hour display flashes.
– Adjust the hour display with the button and/or button .
– Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
– You can set the following segments in the same way as the
hours by pressing the button and the button .
Info
The seconds can only be set to zero.
If no button is pressed for 15–20 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
7.6 Viewing the lap time
Info
This function can only be opened if lap times have actually been timed.
Condition
The motorcycle is stationary.
400321-01
– Repeatedly press the button briefly until LAP appears at the
bottom right of the display.
– Briefly press the button .
LAP 1 appears on the left side of the display.
– The laps 1–10 can be viewed with the button .
– Press and hold the button for 3-5 seconds.
The lap times are deleted.
– Briefly press the button .
Next display mode
Info
When an impulse is received from the wheel speed sen-
sor, the left side of the display changes back to the
SPEED mode.

KTM 500 EXC F 2024 Specifications

General

Displacement	510.9 cm³
Bore x Stroke	95 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Ground Clearance	355 mm
Seat Height	960 mm
Dry Weight	106.5 kg
ABS	No
Engine Type	Single Cylinder, 4-Stroke Engine
Fuel System	Electronic fuel injection (EFI)
Front Brake	Disc brake 260 mm
Rear Brake	Disc brake 220 mm
Fuel Tank Capacity	8.5 liters
Frame	Central double-cradle type 25CrMo4 steel