6 CONTROLS
20
6.5 Light switch
V00855-11
The light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on – The light switch is turned downward.
In this position, the low beam and tail light are
switched on.
High beam on – The light switch is turned upward.
In this position, the high beam and the tail light are
switched on.
6.6 Turn signal switch
V00855-12
Turn signal switch
1
is fitted on the left side of the handlebar.
Possible states
Turn signal light off
Turn signal light, left, on – The turn signal switch is
pressed to the left. The turn signal switch returns to
the middle position after activation.
Turn signal light, right, on – The turn signal switch is
pressed to the right. The turn signal switch returns to
the middle position after activation.
To switch off the turn signal, press the turn signal switch toward
the switch housing.
6.7 Start button/emergency OFF switch
W00289-10
Combination switch
1
is fitted on the right side of the handlebar.
Possible states
Ignition off – In this position, the ignition circuit
is interrupted, a running engine stops, and a
non-running engine will not start.
Ignition on – In this position, the ignition circuit is
closed and the engine can be started.
Start button pressed – In this position, the starter
motor is actuated.
6.8 Overview of indicator lights
W00294-10
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
Turn signal indicator lamp flashes green – The turn
signal is switched on.
To Next Page
Loading...
Need help?
General
