KTM 690 ENDURO EU 2009 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 113
100296-10
– Position brake-hose guide . Mount and tighten screws .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.56Changing the headlight bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
– Remove the headlight mask with the headlight. ( p. 111)
600610-10
– Pull off connector .
– Take off rubber cap  of the headlight bulb.

KTM 690 ENDURO EU 2009 Specifications

General

Brand	KTM
Model	690 ENDURO EU 2009
Category	Motorcycle
Language	English

Summary

Important Notes on Motorcycle Usage and Safety

Use Definition

Defines the intended use of KTM sport motorcycles for road and offroad operation.

Maintenance, Warranty & Parts Guidance

Emphasizes correct maintenance, warranty conditions, and approved parts usage.

Safety, Transport & Environmental Precautions

Covers transport safety, environmental responsibility, and explanation of risk grades.

Vehicle Identification and Specifications

View of Vehicle Components

Illustrates and labels key components from front-left and rear-right views.

Serial Number and Part Number Locations

Shows where to find chassis, engine, key, fork, and shock absorber numbers.

Controls and Instruments Operation

Handlebar Controls Overview

Describes levers, switches for lights, horn, starter, kill switch, and ignition.

Combination Instrument Functions

Details speedometer, tachometer, indicators, trip meters, and display settings.

Other Vehicle Controls

Explains filler cap, seat release, footrests, shift lever, brake pedal, and side stand.

Operation and Riding Guidance

Preparation and Running-in Procedures

Provides general tips for first use and engine running-in procedures.

Riding Instructions and Safety

Covers starting, shifting, braking, stopping, parking, and refueling.

Maintenance and Service Schedule

Service Schedule Overview

Outlines important maintenance work for authorized KTM workshops.

Chassis and Engine Maintenance Procedures

Detailed steps for fork, shock absorber, chain, brakes, oil, and filter maintenance.

Troubleshooting and Technical Data

Troubleshooting Common Issues

Lists faults, possible causes, and recommended actions for engine and electrical issues.

Flashing FI Warning Codes

Explains FI warning lamp codes and their potential causes.

Technical Specifications Summary

Provides detailed data for engine, chassis, fork, and shock absorber components.