MAINTENANCE WORK ON CHASSIS AND ENGINE 114
600611-10
– Detach spring bar .
– Remove headlight bulb .
– Insert a new headlight bulb into the headlight housing.
Headlight (H4/P43t) ( p. 159)
– Fit the headlight bulb in the headlight using the spring bar.
– Replace the rubber cap. Attach the connector.
– Refit the headlight mask with the headlight. ( p. 112)
9.57Changing the parking light bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
– Remove the headlight mask with the headlight. ( p. 111)
600610-12
– Remove rubber cap .
To Next Page
Loading...
Need help?
General
